Request a quote on stock# 2171| Specification | Description |
|---|---|
| one(1) used Jeffrey Hammermill, | |
| carbon steel. | |
| 10" x 10" feed opening, tapers to 7" x 9". | |
| Equipped with additional bolt on hopper, 14" high. | |
| 10 hp, 220/440 voltage, 3 phase, 870 rpm. to V-belts. | |
| Hammermill shaft RPM is approx. 553 rpm. | |
| (10) swinging hammers, 2 rows of 3, 2 rows of 2. | |
| hammers 1.25" x 2.25". | |
| Replaceable liners in chamber and feed hopper. | |
| Discharge has removeable bar grate. | |
| Unit has been test run in our shop. | |
| We will test run unit during inspection. |
Ingalls Process Equipment Co. Inc.
191 Elevator Ave.
Painesville, OH 44077
440-352-9403
440-352-9476
dick@ingallsequipment.com